Industrial axial fan blades in PAG, conductive PAGAS or die-cast aluminium: fixed-angle, adjustable, sickle and high-pressure types from 180 mm to 2200 mm.
An industrial axial fan blade is the part that sets how a fan performs: the blade profile governs noise, the blade count governs the split between airflow and static pressure, and the blade material decides how much heat and what atmosphere the fan can survive.
UTEK-DELE moulds blades in PAG for general heavy-load cooling, in conductive PAGAS where static discharge has to be avoided, and casts them in aluminium ADC12 for high-temperature zones. Blades are supplied individually for replacement work or as complete balanced sets for new fans, in diameters from 180 mm to 2200 mm.
| Blade type | Series | Blade count | Diameter range | Blade material |
|---|---|---|---|---|
| Fixed-angle blade | H Series (P3H, S14H, S16H, S1H, 1XL, 2H) | 5-12 | 180-745 mm | PAG / PAGAS / ALU |
| Adjustable-pitch blade | P Series, 7Z Series, K Series | 1-16 | 180-1343 mm | PAG / PAGAS / ALU |
| Sickle blade (low noise) | S Series | 3-16 | 250-1040 mm | PAG / PAGAS / ALU |
| Bi-directional blade | R4Z Series | Quoted per project | 299-1011 mm | ALU (ADC12) |
| High pressure blade | PMAX Series | 9 | 180-700 mm | PAG |
| Large blade | W Series, U Series | 6-12 | 560-2200 mm | PAG / PAGAS / ALU |
Blades are not interchangeable between duty points: the same diameter with a different blade count produces a different airflow and pressure. That is why a blade is always quoted with the hub family it runs on.
Blade count is the most direct tuning parameter in the range:
More blades raise static pressure and suit dense radiator cores and ducted installations
Fewer blades favour airflow, reduce blade-passing noise and lower the starting load
Blade count is chosen with the hub, because the hub rating limits how much blade mass can be carried
Heavy-load duties are reviewed against the temperature and the atmosphere before the material is fixed
| Material | Composition | Temperature range | Blade duty |
|---|---|---|---|
| PAG | PA6 with 30% glass fibre | -40 °C to 110 °C | General heavy-load blades, anti-aging |
| PAGAS | PA6 with 15% carbon fibre and 15% glass fibre (conductive) | -30 °C to 100 °C | Blades for dust and gas atmospheres where static discharge must be avoided |
| ALU | Die-cast aluminium ADC12 | -40 °C to 150 °C, short-term 300 °C for 2 h | High-temperature blades and fire-resistant equipment |
Blade profile is what separates a quiet fan from a noisy one at the same duty point. The sickle blade used in the S Series distributes the pressure change along the blade instead of concentrating it at the tip, which lowers blade-passing noise and keeps the airflow smooth. Blade geometry is controlled in production so that a replacement blade matches the original set rather than merely resembling it.
Blade replacement is the cheapest way to restore a fan whose hub and shaft are still serviceable:
The original blade type, count and material are confirmed from the fan records
The existing hub family is checked, because the blade root has to match it
The new blade set is assembled on the hub and balanced as an impeller before shipment
The fan is returned to service with the original airflow and noise level
Where the blades are renewed in the field, keeping the same blade count and material is what preserves the balance condition of the fan.
Blades from this range are used across engine cooling, process cooling and building ventilation:
Engine radiator cooling on tractors, construction machinery and generator sets
Cooling towers and industrial heat exchangers
Livestock housing and industrial ventilation where noise is regulated
High-temperature and explosible-atmosphere duties with conductive blades
Complete balanced assemblies built from these blades are described on the industrial axial fan impellers page, and the air-moving units they are fitted to on the industrial axial fan propellers page. Low-noise blade applications are covered by the S Series sickle blades, high airflow duties by the K Series, and balance records by the balancing machine page.
The P3H is a fixed-angle axial fan blade covering 173-745 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The P3H is a fixed-angle axial fan blade covering 173-745 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S14H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S14H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The pneumatic reversible fan turns its blades with compressed air, so the airflow can be reversed to clear a radiator or cooler core where no hydraulic circuit is available.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The pneumatic reversible fan turns its blades with compressed air, so the airflow can be reversed to clear a radiator or cooler core where no hydraulic circuit is available.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The P3Z, P4Z, P5Z and P6Z are adjustable-pitch axial fan blades in the P Series, covering 250-1343 mm with 1-16 blades on the Z hub families for radiator and process cooling.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The P3Z, P4Z, P5Z and P6Z are adjustable-pitch axial fan blades in the P Series, covering 250-1343 mm with 1-16 blades on the Z hub families for radiator and process cooling.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 6W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-6 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 6W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-6 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 9W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 9W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The R4Z is a special-profile axial fan blade for low-noise and corrosion-resistant duties: 299-1011 mm in die-cast aluminium ADC12 on the Z-3 hub.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The R4Z is a special-profile axial fan blade for low-noise and corrosion-resistant duties: 299-1011 mm in die-cast aluminium ADC12 on the Z-3 hub.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S1H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6 or H-8 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S1H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6 or H-8 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The K6Z is an adjustable-pitch axial fan blade for medium-diameter, high airflow fans: 180-1254 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The K6Z is an adjustable-pitch axial fan blade for medium-diameter, high airflow fans: 180-1254 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S38Z is an adjustable-pitch axial fan blade built for high static pressure: 500-943 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S38Z is an adjustable-pitch axial fan blade built for high static pressure: 500-943 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S4Z is an adjustable-pitch axial fan blade covering 530-922 mm with 5 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S4Z is an adjustable-pitch axial fan blade covering 530-922 mm with 5 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S16H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-8, H-10 or H-12 hubs, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S16H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-8, H-10 or H-12 hubs, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S2Z is an adjustable-pitch axial fan blade in the S Series, covering 378-725 mm with 5-16 blades on the Z-3 hub for compact cooling and ventilation duties.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S2Z is an adjustable-pitch axial fan blade in the S Series, covering 378-725 mm with 5-16 blades on the Z-3 hub for compact cooling and ventilation duties.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 7Z is an adjustable-pitch axial fan blade covering 560-922 mm with 5 to 16 blades on Z-3, Z-5 or Z-7 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 7Z is an adjustable-pitch axial fan blade covering 560-922 mm with 5 to 16 blades on Z-3, Z-5 or Z-7 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The PMAX3 is a special-profile axial fan blade for high static pressure: 180-700 mm with nine blades on the PMAX plate hub, in PAG.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The PMAX3 is a special-profile axial fan blade for high static pressure: 180-700 mm with nine blades on the PMAX plate hub, in PAG.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 7XL is an adjustable-pitch axial fan blade for a wide 250-1040 mm range with 3 to 16 blades on the Z-3 hub, in PAG or die-cast aluminium ADC12.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 7XL is an adjustable-pitch axial fan blade for a wide 250-1040 mm range with 3 to 16 blades on the Z-3 hub, in PAG or die-cast aluminium ADC12.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 5W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on the W-3 hub, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 5W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on the W-3 hub, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 1Z is an adjustable-pitch axial fan blade covering 378-725 mm with 5 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 1Z is an adjustable-pitch axial fan blade covering 378-725 mm with 5 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The hydraulic reversible fan turns its blades hydraulically so the airflow can be reversed on demand, clearing dust and chaff from a radiator or cooler core while the machine keeps working.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The hydraulic reversible fan turns its blades hydraulically so the airflow can be reversed on demand, clearing dust and chaff from a radiator or cooler core while the machine keeps working.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 1W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-4 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 1W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-4 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The P3H is a fixed-angle axial fan blade covering 173-745 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe P3H is a fixed-angle axial fan blade covering 173-745 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S14H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe S14H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The pneumatic reversible fan turns its blades with compressed air, so the airflow can be reversed to clear a radiator or cooler core where no hydraulic circuit is available.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe pneumatic reversible fan turns its blades with compressed air, so the airflow can be reversed to clear a radiator or cooler core where no hydraulic circuit is available.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The P3Z, P4Z, P5Z and P6Z are adjustable-pitch axial fan blades in the P Series, covering 250-1343 mm with 1-16 blades on the Z hub families for radiator and process cooling.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe P3Z, P4Z, P5Z and P6Z are adjustable-pitch axial fan blades in the P Series, covering 250-1343 mm with 1-16 blades on the Z hub families for radiator and process cooling.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 6W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-6 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 6W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-6 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 9W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 9W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The R4Z is a special-profile axial fan blade for low-noise and corrosion-resistant duties: 299-1011 mm in die-cast aluminium ADC12 on the Z-3 hub.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe R4Z is a special-profile axial fan blade for low-noise and corrosion-resistant duties: 299-1011 mm in die-cast aluminium ADC12 on the Z-3 hub.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S1H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6 or H-8 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe S1H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6 or H-8 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The K6Z is an adjustable-pitch axial fan blade for medium-diameter, high airflow fans: 180-1254 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe K6Z is an adjustable-pitch axial fan blade for medium-diameter, high airflow fans: 180-1254 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S38Z is an adjustable-pitch axial fan blade built for high static pressure: 500-943 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe S38Z is an adjustable-pitch axial fan blade built for high static pressure: 500-943 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S4Z is an adjustable-pitch axial fan blade covering 530-922 mm with 5 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe S4Z is an adjustable-pitch axial fan blade covering 530-922 mm with 5 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S16H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-8, H-10 or H-12 hubs, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe S16H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-8, H-10 or H-12 hubs, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S2Z is an adjustable-pitch axial fan blade in the S Series, covering 378-725 mm with 5-16 blades on the Z-3 hub for compact cooling and ventilation duties.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe S2Z is an adjustable-pitch axial fan blade in the S Series, covering 378-725 mm with 5-16 blades on the Z-3 hub for compact cooling and ventilation duties.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 7Z is an adjustable-pitch axial fan blade covering 560-922 mm with 5 to 16 blades on Z-3, Z-5 or Z-7 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 7Z is an adjustable-pitch axial fan blade covering 560-922 mm with 5 to 16 blades on Z-3, Z-5 or Z-7 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The PMAX3 is a special-profile axial fan blade for high static pressure: 180-700 mm with nine blades on the PMAX plate hub, in PAG.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe PMAX3 is a special-profile axial fan blade for high static pressure: 180-700 mm with nine blades on the PMAX plate hub, in PAG.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 7XL is an adjustable-pitch axial fan blade for a wide 250-1040 mm range with 3 to 16 blades on the Z-3 hub, in PAG or die-cast aluminium ADC12.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 7XL is an adjustable-pitch axial fan blade for a wide 250-1040 mm range with 3 to 16 blades on the Z-3 hub, in PAG or die-cast aluminium ADC12.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 5W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on the W-3 hub, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 5W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on the W-3 hub, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 1Z is an adjustable-pitch axial fan blade covering 378-725 mm with 5 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 1Z is an adjustable-pitch axial fan blade covering 378-725 mm with 5 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The hydraulic reversible fan turns its blades hydraulically so the airflow can be reversed on demand, clearing dust and chaff from a radiator or cooler core while the machine keeps working.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe hydraulic reversible fan turns its blades hydraulically so the airflow can be reversed on demand, clearing dust and chaff from a radiator or cooler core while the machine keeps working.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 1W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-4 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 1W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-4 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
