Industrial axial fan impellers are balanced blade-and-hub assemblies from 180 mm to 2200 mm, supplied ready to fit so a replacement needs no on-site balancing.
An industrial axial fan impeller is a balanced assembly: the impeller blades mounted on their hub, corrected as one rotating body and supplied ready to fit on a shaft. Treating the impeller as an assembly rather than a set of loose parts is what makes a replacement behave like the original.
UTEK-DELE builds impellers from 180 mm to 2200 mm across the fixed-angle, adjustable-pitch and special blade families. Each impeller is balanced on a hand laser balancing machine before shipment, and the blade count, hub family and pitch setting are recorded so the impeller can be reproduced later without a second balancing campaign.
The impeller is the rotating part of the fan, and every element in it affects balance and airflow:
Impeller blades — moulded PAG or PAGAS, or die-cast aluminium where temperature requires it
The hub that carries the blades — H-6 to H-12, the Z family, or W-3 to W-10
Fasteners and, where used, the taper bush that clamps the impeller to the shaft
The balancing correction applied to the finished impeller
Because the impeller is balanced as an assembly, a spare impeller can be fitted in the field without a balancing rig, which matters on equipment that is serviced away from a workshop.
Balancing is the step that separates an impeller from a collection of blades. It is measured and corrected with the blades mounted, because the assembly is what runs on the machine:
Measurement locates the heavy point of the assembled impeller
Correction brings the impeller and hub into balance
Verification confirms the result before the impeller is released
Recording keeps the setting so a replacement impeller can be matched
The effect is practical rather than theoretical: a balanced impeller runs without the low-frequency rumble that an out-of-balance wheel produces at low speed, and it does not loosen its own fasteners over a service interval.
| Impeller class | Diameter range | Blade count | Hub family | Typical impeller duty |
|---|---|---|---|---|
| Small impellers | 180-745 mm | 5-12 | H-6 to H-12, PMAX plate | Engine cooling, compact cooling packs |
| Medium impellers | 250-1343 mm | 1-16 | Z-3 to Z-18 | Heat exchangers, HVAC, compressors, process cooling |
| Large impellers | 1000-2200 mm | 6-12 | W-3 to W-10 | Cooling towers, generator sets, moving-air units |
The hub family is confirmed with the impeller, never separately: blade mass, shaft diameter and the mounting pattern all have to agree before an impeller can be released for production.
| Material | Composition | Temperature range | Impeller duty |
|---|---|---|---|
| PAG | PA6 with 30% glass fibre | -40 °C to 110 °C | Standard heavy-load impellers |
| PAGAS | PA6 with 15% carbon fibre and 15% glass fibre (conductive) | -30 °C to 100 °C | Impellers for dust and gas atmospheres |
| ALU | Die-cast aluminium ADC12 | -40 °C to 150 °C, short-term 300 °C for 2 h | Impellers for high-temperature zones |
An impeller is normally replaced rather than repaired, and the aim is a part that needs no adjustment after fitting:
The original diameter, blade count and hub family are confirmed from the fan records
The replacement impeller is supplied balanced, with the pitch already set for the duty point
The shaft interface is checked against the existing taper bush or hub fit
The impeller is fitted and the machine returned to service without on-site balancing
Where only the blades are worn, a blade set can be supplied against the existing hub instead of a complete impeller, which is the cheaper route when the hub and shaft are still serviceable.
Each impeller is released with its blade count, hub family, material batch and pitch setting recorded. That record is what allows a second impeller to be built for the same fan later, and it is also how a plant keeps several machines on the same impeller specification even when they were commissioned years apart.
The same approach is used for the industrial axial fan propellers composed of these impellers, and for the individual industrial axial fan blades when only the blades are renewed. Production impellers are listed on the H Series, P Series and Equipment and balancing pages.
The U10W is a large adjustable-pitch axial fan blade for 1000-2200 mm fans with 6, 7, 8 or 10 blades on the W-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The U10W is a large adjustable-pitch axial fan blade for 1000-2200 mm fans with 6, 7, 8 or 10 blades on the W-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 4XR is a small-diameter axial fan blade in die-cast aluminium ADC12 for high-temperature zones: 180-700 mm, 5 to 12 blades on an H-6 hub with adjustable angle disc.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 4XR is a small-diameter axial fan blade in die-cast aluminium ADC12 for high-temperature zones: 180-700 mm, 5 to 12 blades on an H-6 hub with adjustable angle disc.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S48Z is an ultra-stiff axial fan blade for high-pressure mobile applications, with the diameter and blade count quoted per project and the Z-3 hub in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S48Z is an ultra-stiff axial fan blade for high-pressure mobile applications, with the diameter and blade count quoted per project and the Z-3 hub in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 11W is an adjustable-pitch axial fan blade for high performance moving-air units, covering 560-2200 mm with 6 to 12 blades on the W-3 hub in moulded PAG or conductive PAGAS.
Adjustable pitch set at assembly and re-trimmable in service
560-2200 mm diameter range with 6-12 blades
PAG and conductive PAGAS blade options on the W-3 hub
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 11W is an adjustable-pitch axial fan blade for high performance moving-air units, covering 560-2200 mm with 6 to 12 blades on the W-3 hub in moulded PAG or conductive PAGAS.
Adjustable pitch set at assembly and re-trimmable in service
560-2200 mm diameter range with 6-12 blades
PAG and conductive PAGAS blade options on the W-3 hub
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The K6Z is an adjustable-pitch axial fan blade for medium-diameter, high airflow fans: 180-1254 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The K6Z is an adjustable-pitch axial fan blade for medium-diameter, high airflow fans: 180-1254 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 4XR is a small-diameter axial fan blade in die-cast aluminium ADC12 for high-temperature zones: 180-700 mm, 5 to 12 blades on an H-6 hub with adjustable angle disc.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 4XR is a small-diameter axial fan blade in die-cast aluminium ADC12 for high-temperature zones: 180-700 mm, 5 to 12 blades on an H-6 hub with adjustable angle disc.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The P3Z is an adjustable-pitch axial fan blade covering 250-1300 mm with 3 to 16 blades on the Z-3 hub, available in PAG, conductive PAGAS or die-cast aluminium ADC12.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The P3Z is an adjustable-pitch axial fan blade covering 250-1300 mm with 3 to 16 blades on the Z-3 hub, available in PAG, conductive PAGAS or die-cast aluminium ADC12.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S38Z is an adjustable-pitch axial fan blade built for high static pressure: 500-943 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S38Z is an adjustable-pitch axial fan blade built for high static pressure: 500-943 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 9W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 9W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 7Z is an adjustable-pitch axial fan blade covering 560-922 mm with 5 to 16 blades on Z-3, Z-5 or Z-7 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 7Z is an adjustable-pitch axial fan blade covering 560-922 mm with 5 to 16 blades on Z-3, Z-5 or Z-7 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S4Z is an adjustable-pitch axial fan blade covering 530-922 mm with 5 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S4Z is an adjustable-pitch axial fan blade covering 530-922 mm with 5 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 7XL is an adjustable-pitch axial fan blade for a wide 250-1040 mm range with 3 to 16 blades on the Z-3 hub, in PAG or die-cast aluminium ADC12.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 7XL is an adjustable-pitch axial fan blade for a wide 250-1040 mm range with 3 to 16 blades on the Z-3 hub, in PAG or die-cast aluminium ADC12.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 1W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-4 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 1W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-4 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 5W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on the W-3 hub, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 5W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on the W-3 hub, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 6W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-6 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 6W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-6 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The U10W is a large adjustable-pitch axial fan blade for 1000-2200 mm fans with 6, 7, 8 or 10 blades on the W-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The U10W is a large adjustable-pitch axial fan blade for 1000-2200 mm fans with 6, 7, 8 or 10 blades on the W-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The P3H is a fixed-angle axial fan blade covering 173-745 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The P3H is a fixed-angle axial fan blade covering 173-745 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S14H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S14H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S16H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-8, H-10 or H-12 hubs, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S16H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-8, H-10 or H-12 hubs, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S1H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6 or H-8 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S1H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6 or H-8 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The U10W is a large adjustable-pitch axial fan blade for 1000-2200 mm fans with 6, 7, 8 or 10 blades on the W-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe U10W is a large adjustable-pitch axial fan blade for 1000-2200 mm fans with 6, 7, 8 or 10 blades on the W-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 4XR is a small-diameter axial fan blade in die-cast aluminium ADC12 for high-temperature zones: 180-700 mm, 5 to 12 blades on an H-6 hub with adjustable angle disc.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 4XR is a small-diameter axial fan blade in die-cast aluminium ADC12 for high-temperature zones: 180-700 mm, 5 to 12 blades on an H-6 hub with adjustable angle disc.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S48Z is an ultra-stiff axial fan blade for high-pressure mobile applications, with the diameter and blade count quoted per project and the Z-3 hub in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe S48Z is an ultra-stiff axial fan blade for high-pressure mobile applications, with the diameter and blade count quoted per project and the Z-3 hub in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 11W is an adjustable-pitch axial fan blade for high performance moving-air units, covering 560-2200 mm with 6 to 12 blades on the W-3 hub in moulded PAG or conductive PAGAS.
Adjustable pitch set at assembly and re-trimmable in service
560-2200 mm diameter range with 6-12 blades
PAG and conductive PAGAS blade options on the W-3 hub
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 11W is an adjustable-pitch axial fan blade for high performance moving-air units, covering 560-2200 mm with 6 to 12 blades on the W-3 hub in moulded PAG or conductive PAGAS.
Adjustable pitch set at assembly and re-trimmable in service
560-2200 mm diameter range with 6-12 blades
PAG and conductive PAGAS blade options on the W-3 hub
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The K6Z is an adjustable-pitch axial fan blade for medium-diameter, high airflow fans: 180-1254 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe K6Z is an adjustable-pitch axial fan blade for medium-diameter, high airflow fans: 180-1254 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 4XR is a small-diameter axial fan blade in die-cast aluminium ADC12 for high-temperature zones: 180-700 mm, 5 to 12 blades on an H-6 hub with adjustable angle disc.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 4XR is a small-diameter axial fan blade in die-cast aluminium ADC12 for high-temperature zones: 180-700 mm, 5 to 12 blades on an H-6 hub with adjustable angle disc.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The P3Z is an adjustable-pitch axial fan blade covering 250-1300 mm with 3 to 16 blades on the Z-3 hub, available in PAG, conductive PAGAS or die-cast aluminium ADC12.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe P3Z is an adjustable-pitch axial fan blade covering 250-1300 mm with 3 to 16 blades on the Z-3 hub, available in PAG, conductive PAGAS or die-cast aluminium ADC12.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S38Z is an adjustable-pitch axial fan blade built for high static pressure: 500-943 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe S38Z is an adjustable-pitch axial fan blade built for high static pressure: 500-943 mm, 3 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 9W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 9W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 7Z is an adjustable-pitch axial fan blade covering 560-922 mm with 5 to 16 blades on Z-3, Z-5 or Z-7 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 7Z is an adjustable-pitch axial fan blade covering 560-922 mm with 5 to 16 blades on Z-3, Z-5 or Z-7 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S4Z is an adjustable-pitch axial fan blade covering 530-922 mm with 5 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe S4Z is an adjustable-pitch axial fan blade covering 530-922 mm with 5 to 16 blades on the Z-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 7XL is an adjustable-pitch axial fan blade for a wide 250-1040 mm range with 3 to 16 blades on the Z-3 hub, in PAG or die-cast aluminium ADC12.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 7XL is an adjustable-pitch axial fan blade for a wide 250-1040 mm range with 3 to 16 blades on the Z-3 hub, in PAG or die-cast aluminium ADC12.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 1W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-4 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 1W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-4 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 5W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on the W-3 hub, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 5W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on the W-3 hub, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The 6W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-6 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe 6W is a large-diameter adjustable-pitch axial fan blade covering 560-2200 mm with 6 to 12 blades on W-3 or W-6 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The U10W is a large adjustable-pitch axial fan blade for 1000-2200 mm fans with 6, 7, 8 or 10 blades on the W-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe U10W is a large adjustable-pitch axial fan blade for 1000-2200 mm fans with 6, 7, 8 or 10 blades on the W-3 hub, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The P3H is a fixed-angle axial fan blade covering 173-745 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe P3H is a fixed-angle axial fan blade covering 173-745 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S14H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe S14H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6, H-8 or H-10 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S16H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-8, H-10 or H-12 hubs, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe S16H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-8, H-10 or H-12 hubs, in PAG or conductive PAGAS.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
The S1H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6 or H-8 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
Inquire NowThe S1H is a fixed-angle axial fan blade covering 180-700 mm with 5 to 12 blades on H-6 or H-8 hubs, in PAG, conductive PAGAS or die-cast aluminium.
PAGAFR material option: PA6 reinforced with glass fiber and flame-retardant additives. Compared with PAG, PAGAFR includes flame-retardant additives for applications requiring flame-retardant properties.
